Loading

Report as inappropriate

Yes this makes sense. I was curious if there was a reason Ben chose one over the other.

FYI here are the calculations (at 16 uSteps):
1-start = 2mm/turn
200 step/turn x 16uStep/step x 1turn/2mm = 1600 uStep/mm, or 0.000625mm per uStep

4-start=8mm/turn
200 step/turn x 16uStep/step x 1turn/8mm = 400 uStep/mm, or 0.0025mm per uStep

Both should be sufficient for 0.06mm layer height.