May be a little bit annoying, for FANs: is 500mA per each port (eg. D7 support a 0.5A max load) or is the total supported on all the 3 ports (D9+D7+D44)?
On the board we have:
An Vanguard VS40200ATD 25V, 35A Power MOSFET
2 X Fairchild FDD8780 MOSFET 40V, 200A for Heater 0 and Heater 1
Don't know if the FANx PINS are wired to one of these MOSFETS.
What i want to achieve is to connect 3 or 4 x 0.125A FANs on FAN1 port (for MB and aux MOSFET cooling).
May be a little bit annoying, for FANs: is 500mA per each port (eg. D7 support a 0.5A max load) or is the total supported on all the 3 ports (D9+D7+D44)?
On the board we have:
Don't know if the FANx PINS are wired to one of these MOSFETS.
What i want to achieve is to connect 3 or 4 x 0.125A FANs on FAN1 port (for MB and aux MOSFET cooling).