Loading

Report as inappropriate

Well this is the scad part for the reprap-fab hotend

Will you supply your design files?

//PEEK mount holes for http://reprap-fab.orgreprap-fab.org 10mm dia insulator
module peek_reprapfaborg_holes(){
extruder_recess_d=10.8;
extruder_recess_h=20;

    // Recess in base
    translate([0,0,-1])
    cylinder(r=extruder_recess_d/2,h=extruder_rec

ess_h+1);

    // Mounting holes to affix the extruder into the recess.
    translate([5,0,min(extruder_recess_h/2, base_thickness-2)])
    rotate([-90,0,0]){

// cylinder(r=m3_diameter/2-0.5,/tight/,h=wade_block_depth+2,center=true);
polyhole(2.5,wade_block_depth+2);}

  translate([-5,0,min(extruder_recess_h/2, base_thickness-2)])
    rotate([-90,0,0]){

// cylinder(r=m3_diameter/2-0.5,/tight/,h=wade_block_depth+2,center=true);
polyhole(2.5,wade_block_depth+2);}

    //cylinder(r=m4_diameter/2-0.5/* tight */,h=wade_block_depth+2,center=tr

ue);
}