Loading

Report as inappropriate

Hello,

I got an anycubic Kossel Linear Plus last year and no matter how much I tried I never managed to level it correctly and be level on the entire surface of the bed.

Currently I have the printer on an SKR 1.4 turbo board with TMC2209 and it kinda works OK, but I have some issue, that the size of the prints are a little bit off in the left side (they seem slightly smaller not too much but maybe 0.5 mm). I noticed that the effector carriage is moving a little bit so I would like to change the rods for the printer. Unfortunately I don't find any good genuine source for the rods, and I am also not really savy to make them by myself. I saw some designs for magnetic rods here on thingiverse, but the issue is that I don't have another printer to print the components, and I don't want to use this printer as it seems that it has some dimension issues. And for this parts the sizes are critical...

I would think to order something like this https://www.aliexpress.com/item/32808866275.html?spm=a2g0o.productlist.0.0.12746007adzYyS&algo_pvid=4ae758db-57cc-438a-aae4-5696fcbe0ed5&algo_expid=4ae758db-57cc-438a-aae4-5696fcbe0ed5-3&btsid=0ab6d59515939707120333096e74b9&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

I am pretty sure that the magnetic carriages will fit my printer, but I don't know if the effector module would do the trick... Mainly because I don't see how you would put on that the fan for part cooling. As well as the rods are 300 mm.

Does anybody know a place from where you can get some rods the size of this printer? Most sales which I see are for 200 250 or 300 mm carbon rods and as far as I know, the rods on the linear plus are 267 mm...

I don't really need magnetic rods, but I want something which will definitely not wiggle.

Any suggestions are very welcome. Also if you would have a list of parts that would be great.

Thank you in advance,