Went down the RAMPS 1.4 route when the crap colido motherboard went "puft", years of reliable service followed until one day it stopped part way through a print and at £23 for a 32 bit board I gave it a go. I am now in the process of going 32 bit and went the whole hog of 2208 drivers. After probably reading too much before I started I have yet to get any sort build on the chip and it's bound to be something stupid because it always is. If anyone out there has a working firmware configuration for a 3diy I'd be most grateful
Went down the RAMPS 1.4 route when the crap colido motherboard went "puft", years of reliable service followed until one day it stopped part way through a print and at £23 for a 32 bit board I gave it a go. I am now in the process of going 32 bit and went the whole hog of 2208 drivers. After probably reading too much before I started I have yet to get any sort build on the chip and it's bound to be something stupid because it always is. If anyone out there has a working firmware configuration for a 3diy I'd be most grateful