Loading

Report as inappropriate

Hello k5052,

I don't have files for the yaw hing itself as they are not printed parts. I used two nose gear steering mounts from hobbyking (http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=8432&aff=247441)http://www.hobbyking.com/hobby.... Following the technique used by David over at http://flitetest.comflitetest.com shown here: http://www.flitetest.com/articles/tricopter-scratch-buildhttp://www.flitetest.com/artic...

Hope this helps!

-Mark