Report as inappropriate

AbuMaia, the bases have a 110mm diameter. For the blades you will need a platform at least 220 wide, 115mm deep, and 100mm in the Z direction (tall). That would give you a few mm margin on all directions. I have a Makerbot R2X, so I had real state to spare. I would start by printing the MountingBase and check if it will fit ok over your light socket. I made it so that it would cover most light sockets, but check yours before starting. For the 14-blade variant, your new concern would be the Z axis. It would have to be at least 140mm.