Loading

Report as inappropriate

The print goes:

  • from 0.00 mm to 120.73 mm in X and is 120.73 mm wide
  • from 0.00 mm to 190.00 mm in Y and is 190.00 mm deep
  • from 0.00 mm to 61.00 mm in Z and is 61.00 mm high
    Estimated duration: 202 layers, 1:28:57

I used Skeinforge in ponterface to slice it this time as slic3r output the height at 15mm even after I made the changes you suggested, are the size parameters correct now?