Loading

3D Printed engine support group

24 Topics 9 Things 429 Members

Recent Topics

1:3 scale ball joints

by Justy_guy

I'm working on a 1:3 scale suspension and I'll need some ball joints, any ideas how to design them?

View Comment

help

by DANTHEMAN_18T

is there a hardware kit for the 1/3 scale toyota engine

View Comment

sanding the Engine block and piston tools

by jrock1350

Just wanted to share this with the group. My son and I were sanding the bore s and pistons for the 22RE engine. We got talking and figured there was an easier way so we made these. https://www.thingiverse.com/thing:3167802
ID and OD sanders for the drill to speed it up. they work really good and so I thought I would share.

3d printed engine block sanders
Sanders
View Comment

Valve assembly

by bswails1384

I dont fully understand the valve assembly process. It says to glue a 3mm jam nut into the spring retainer. Does the end of the 35mm rod need to be threaded?

View Comment

Valve Springs

by crowdpleazer

Having trouble finding appropriate springs to work. The hardware list just says "I used custom springs once again."

Thanks

View Comment