Loading

power source

Please Login to Comment

I am new to 3d printing and bought a used mega s. The psu went out and bought one from amazon but sent a much different looking then the picture and this one is 24v. Will it work or do i need to return? Thanks

12v 25a 300w
https://www.ebay.com/itm/Universal-12V-1-3-5-10-15-20-25-30A-Switching-Power-Supply-Driver-for-LED-Strip/153948943767?hash=item23d8127597:g:bWAAAOSwkCZcmyGl

This is a cheap one, but it should fit - if you want a good one you have to get a 12v PSU from Meanwell that you have to make fit!

RETURN!
You need an 12v!
And one that fits, they are not all the same....

Thanks I haven't even wasted the time with this. New one should be here tomorrow.

Almost any 300W / 12V power source will work well, and in the case is huge space. But 24V is not usable, you would burn the mainboard.

Almost any PSU wont fit!
Most PSU have a mirror layout design, so the main power cabel will be to short...
And also the screw holes have to match those of them in the case...
Why do it the easy way if you can do it hard...