Sharing ideas is important, we help each other

by voodoopt

I hope this group can bring people together who have a hobby improve the bike trough usefulness of our 3D printers

View Comment

Modular mounting system for bikes aka GoPro mount

by switch87

Hi all,

There are a lot of GoPro based mounting systems for all kind of bike lights/computers/cams here on thingiverse, but one thing I missed was a decent clamp/bracket to mount easily these on the bike. For this reason I started drawing my own. I have this verry nice clamp for my Moon Metheorstorm light, so the first iteration was a (almost) perfect copy of this one with additional parts to make it compatible with GoPro. My later version is still based on this bracket but with less parts and easier to print.

So here it is, a bike bracket with quick and easy clamping system. I already tested it on my handlebar and front suspension (Fox). I also included links to all connectors to lights, computers and cams I could find or made myself. Please let me know what you think about it, what is missing in the documentation (apart from assembly instructions they are coming) and of course what could be done better.


Modular Mounting System bike bracket (handlebar or front suspension)
bike_light_mount Bike_mount GoPro_Mount
View Comment

Warning sign for bike

by Aerotronic

Hi The bike Group,

May be that thing can interest some of the members of this group.


Have fun

Bike Warning Sign light 30 Leds (Écarteur de danger de vélo lumineux à 30 leds)
View Comment

Warning sign for bike

by Aerotronic

Hi The bike Group,

May be that thing can interest some of the members of this group.


Have fun

Bike Warning Sign light 30 Leds (Écarteur de danger de vélo lumineux à 30 leds)
View Comment

Spoke Tensiometer Calibration Rig (Ideas / Projects)

by WheresWaldo

In order not to "clutter" the existing thread on Tensiometers, this topic is now open to discuss how to calibrate the growing numbers of tensimeters that are appearing on Thingiverse. Hopefully we can discuss parts lists, design ideas and the like, in an effort to come up with cost effective and easy to build / print calibration devices.

calibration spoke tensimeter wheel_building
View Comment

Wheelbuilding Tensiometer (develoopment)

by Modellaner

We mooved here because the extreme long comment section have to end.

So this should be a possibility to develoop a precise, cheap and of course printable Tensiometer like this: https://www.thingiverse.com/thing:2810089/#comment-1835147

View Comment

Rohloff Shifter - Any Tips?

by MattWhelan

I'm considering a Rohloff Speedhub for my next bike, but I like drop bars. The factory Rohloff shifter is a grip-shifter that mounts on 22.2mm diameter straight bars, rather than 23.8mm drop bars.

Because the indexing for the hub is all in the hub itself, rather than in the shifter, I think I could design and print a pretty nice grip shifter for drop bars, or possibly some sort of fat lever shifter, even. The most reasonable drop bar mounted solution that I'm aware of is Comotion's $250 shifter, which looks very nice, and seems to be milled out of nice metal parts, but frankly, I'd rather design and print something, so that a not-$250-solution will exist.

I don't think the actual CAD bit will be all that difficult; I have a fair bit of OpenSCAD experience, and the parts aren't all that complicated. I think. But, I'm wondering if anyone here has any tips about designing long-wearing all-weather printable bike parts.

I'm also wondering if anyone around here owns a Speedhub and would be interested in beta testing. I don't have that bit yet, and while the spec sheet from Rohloff is quite detailed, there's no substitute for trying it out.

View Comment

Any great bike hack you would like to share ?

by zBis

Hey guys !
We're a FabLab trying gather great projects about bike hacks in general, do you have anything in mind that would fit ?
And if you're working on any project we'd be eager to help !

Greetings from Vendée

View Comment

Let's Make a Custom Bike Light ^_^

by Spindoctor


I am unsatisfied with the commercially available bike lights.
They are either expensive, use uncommon battery types or can easily be stolen (when left on the bike).

Therefore I am willing to design a custom bike light. However, I could not do that on my own.

Would you like to join this project?

These are my design goals:

  • water proof
  • runs on a single AA or AAA battery
  • hard to steal (maybe fixed with an "unusual" screw)
  • runs on at least 4 LEDs

I already made some sketches for the design, but I lack the technical knowledge for the circuit.

Please tell me what you think!

View Comment

Drop Bars: Brifter/Brake Lever Angle Shim

by aiber

The Tektro RRL brake levers are arguably the best drop bar brake levers I've ever seen. The Tektro RL-340s & similar models (short pull version) are decent, but could be made more comfortable (in my opinion) if they had a smooth transition between the hood & the tops, in a modern style (see any current Shimano, SRAM, or Campagnolo brifter-to-handlebar transition).

Flat transition: https://coresites-cdn.factorymedia.com/rcuk/wp-content/uploads/2015/06/Specialized-Venge-ViAS-Tinkoff-Saxo-Peter-Sagan-04.jpg

TRP packages an extra shim with their RRL levers to achieve this effect: http://trpbrakes.com/pubs/RRL%20Brake%20Lever%20(B5).pdf (instructions).

Purely by guess, I think the shim may also work or be easily adapted to other Tektro models, & maybe beyond those too; I'm assuming the plastic body is roughly the same where it contacts the handlebar, so filing could bring it into a good shape.

Here is a picture of the shim: http://biketouringnews.com/wp-content/uploads/2012/03/IMG_2999.jpg

Perhaps using 3D scanning, the shim can be modeled for ease of 3D printing.

Without the shim, users are forced to choose a very "classic" hood-to-handlebar position (https://farm8.staticflickr.com/7063/6936342796_7a6741ee54_z.jpg) which hurts my & probably other people's wrists.

You can either do #1 (above) or #2 position them so the hood is flat, but that forces the whole body to move down past the tops: http://cdn.velonews.com/wp-content/uploads/2015/05/26.jpg

I've been getting by using old/broken Shimano brifters as brake levers, but this can be an expensive/hard-to-get alternative for other people.

I don't have one of these lovely brake levers though, & guessing the (intricate) geometry behind them is out of the question. Does anyone have one?

View Comment