Loading

Recent Topics

Core XY

by nebula39

I have upgraded my cube to a core xy printer. When i changed my Marlin firmware I have a problem. Y axis is saying it is triggered all the time. I have unplugged the end stop for the y axis and get the same error.
does anyone have any ideas for me?

View Comment

Driver problems

by OV-10A

Just finished the construction and am trying to get to the first print. I'm using a laptop (Toshiba Satelite L850 ) with Win 7.
Having problems with the driver install and following the instructions included don't seem to work 4 me. I can see the driver copied to Sys32-drivers but keep getting a install fail msg and as the printer dosn't recognize the driver I cannot connect the printer.

ALL HELP APPRECIATED

View Comment

General problems

by Borule1

I bought and assembled an flsun cube and I have a few problems with it the major one being that over time the printer has degraded in usefulness, initially I was able to control the printer and adjust it with the program provided in the kit (repetier), however it can no longer control the printer and has an issue of not sending commands to the printer. Does anyone have any advice on what to do?

View Comment

anyone have a cura profile for FLsun Cube3D with cyclops

by angelether

I been searching the web furiously but cant find any profiles at all for the Flsun Cube.
if anyone has any at all plz let me know

View Comment

New Owner... Lots of lurking to come (probably questions too :)

by amidemon

Just thought I'd say hello. I had a FLSUN Cube given to me recently. A friend had it for over a year, but never got the quality of prints he wanted. Somewhere along the line he did something that made him think he fried the motherboard. He ordered another one, but couldn't get the firmware to load. After a week or so of failed attempts to revive it, he sent the motherboard back and told me the printer was free to a good home. I'm fairly new to 3d printing. I have a Tevo Tarantula that I bought about 4 months ago. I have been happy with it. Especially after several upgrades, such as aluminum brackets, layer fan, dual Z, and a mosfet. I have looked over the Cube I now have, and think his print quality issues were likely due to assembly. I think some careful re-assembly and adjustment will take care of a lot. At this time I am waiting for a new motherboard to arrive. I tried several times to load Marlin on the original, but it wasn't happening. The firmware will be my weak spot. I have very little experience setting up Marlin. However, in order to learn we have to start at the beginning. Please feel free to share any tips with me that you feel are worth mentioning. Thanks

FLSUN_Cube new
View Comment