Loading

Recent Topics

Cura 4 profile for QQ-S?

by curso

Hi,

Did someone has a working base Cura 4 profile?

Tx,

Cataldo

cura cura_profile cura_settings Flsun_qq-s
View Comment

Hey there! Quick question for all of you

by NoremacG98

Hey everyone, I’ve been keeping my eye on this printer for a while now, mainly because of the price but I’m still kind of on the fence. I figured I would ask you all what you think of the printer so far and maybe any tips if I decide to get it. Thanks for your time!

View Comment

Updated Marlin 2.0 for FLSun QQ

by NightStorm1000

Heya.

I wanted to share a newer Firmware for the QQ.

This Version has LIN_Advance und UBL activated.

It will only work if you ditch that shitty MKS TFT Display in favor of a RepRapDiscount Full Graphics Display.
More about this in the README

For Calibration and Bed Leveling its best not to use the Leveling Plate. Because it adds around a 1mm to the resulting Values.
Get yourself some Conductive Cloths from Aliexpress and Stick them on the Bed itself. Much better Results.
This way you also free up the USB. Because you can tuck the Corners of the Cloth under the Bed where it hits ground.

https://www.aliexpress.com/item/5pcs-3D-Printer-masking-tape-Flsun-Kossel-Delta-3d-printer-Conductive-paper/32856588381.html?spm=a2g0x.10010108.1000001.12.1ce3568fVnaS1L

https://github.com/NightHammer1000/FLsunQQ_Marlin

FLSUN FLSUN_QQ linear_advance Marlin Marlin 2.0 marlin_2 UBL Update
View Comment

Adding glass bed to FLSun QQ -- recommendations, please

by wsterdan

I've been using the FLSun QQ since Christmas and am very, very happy with it. The black matte printing surface is starting to breakdown though (small tears) and I notice the new model has a glass bed. Is it possible to purchase the glass bed for my printer, and is it similar to Anycubic's Ultrabase? Is it possible to use the Anycuibic 240mm Ultrabase with this printer? I assume I'd lose the 20mm of diameter print area, but I have the Ultrabase on my Anycubic i3 Mega and absolutely love it. Other than that, I assume I could use any of the 260mm Borosilicate glass beds? Any recommendations?

View Comment

QQ Firmware Update

by TheTangoPapa

Hey QQ users,

i want to update my firmware, but i dont know which board the QQ uses, so i can´t realy connect to the printer via Marlin IDE. Does anyone know which motherboard is used in the QQ?

Or even better give me a tutorial for updating the firmware, i´m an absolute beginner in this area.

Thanks in advance!

View Comment