Loading

HyperCube Evolution by SCOTT_3D

35 Topics 96 Things 563 Members

Recent Topics

Hypercube Evolution Z Axis problem

by Monart

Z axis moves up and down perfectly when homing. When I load a file to print and press print, it warms up the heated bed and once that is up to set temperature, it moves Z axis down a bit and thats when it goes haywire. It almost looks like it is not sending enough voltage to motors on slow move or something. I have the Z motors connected in series and that seems to work very good when I send manual move commands. I have a 300x300 bed and am using Marlin 1.1.9 Firmware because I couldnt get the Marlin 2 version to work with my Full Graphics Smart controller. Attached is my Configuration file. Can someone help or tell me what my problem could be ?

View Comment

Hypercube Evolution Compact Dual 4010 Direct Drive Mount

by BoothyBoothy

Hi Everyone, FYI I have created a further variation to my Compact 4010 Blower which includes a direct drive mount for a Creality Dual Gear Extruder. I have included the step files if you wish to remix for your own needs or type of extruder. The basic mount can also be used for a Bowden system if the direct drive mounting bracket is removed.Best Boothy

https://www.thingiverse.com/thing:4514948

Hypercube Evolution Compact Dual 4010 Direct Drive Mount
View Comment

Hypercube Evolution Compact Dual 4010 Duct V3

by BoothyBoothy

Hi All,
FYI I have revised my compact 4010 duct with improved lighter ducts and additional variants for a Volcano Hot End. Best Boothy

https://www.thingiverse.com/thing:4425580

Hypercube Evolution Compact Dual 4010 Duct V3
View Comment

My Hypercube Mods 2 by Boothy

by BoothyBoothy

Hi All, If anyone is interested. I have published some additional mods for my Hypercube Evo (Links below).

The first is a revision of the Compact Dual Fan mount to include an optical X end stop (non stock). Secondly I have mixed my own XY joiner which is fixed to the Y Axis guides with extended fixings. The 4 M3 x 50 mm bolts fasten forward of the idler spindles and therefore will hopefully reduce the likelihood of the parts laminating due to drive belt tension. Certainly due to the print orientation not 100% guaranteed not to split but to date they appear much more robust than the original parts. All the retention fixings except the 2 flags locations(thermal M3 inserts) are all M3 Nylocs. Please note this joiner is a 10 mm to 8 mm guide type. I have included step files if you wish to change to 8\8. I have also included a joiner with the standard x flag. Best Boothy

https://www.thingiverse.com/thing:4245520
https://www.thingiverse.com/thing:4245532

Hypercube Evolution Compact Dual 4010 Duct 2 with X Endstop
Hypercube Evolution XY Joiner with Extended Bolt Fixings
View Comment

My Hypercube Mods by Boothy

by BoothyBoothy

Hi All, I have just published some of my major mods for my recent Hypercube Evo build. I have also included step files for personal derivatives. Best Boothy

https://www.thingiverse.com/thing:4222398

https://www.thingiverse.com/thing:4222420

https://www.thingiverse.com/thing:4222489

https://www.thingiverse.com/thing:4222506

PCB & Display Enclosure for 3030 Extrusion SKR V1.4 & 3.5 TFT
Hypercube Evolution Compact Dual 4010 Duct Assembly
3030 PSU Stand
Hypercube Evo Side Mounted Extruder Bracket
View Comment