Loading

JABIL PETG ESD Settings

by aaskedall

Printers Supported: Method, Method X

Material Selected in MakerBot Print: PETG

Support Material: PVA

Print Mode: Balanced

Custom Settings:
Extruder 1 raft base temperature: 270C
Extruder 1 temperature: 260C
Extruder 1 prints speed sparse: 40 mm/s
Extruder 1 print speed outlines 25 mm/s

Other Workflow Steps:
Glue stick

Caddy preferred (absorbs moisture)

View Comment

Jabil PA 4035CF

by Pappas

Has anyone started printing with the above material yet and have setting preferences?

Print Temp: 270°C

Cooling Fan: 100%
Print Speed: 50-55 mm/s
Chamber Temp: 80°C (If the user is not printing with an SR-30 raft then they can get away with a lower chamber temp, otherwise it will warp heavily).
Bed Temperature: ~70°C
Bed Adhesion Type: Raft with SR-30, or no raft with PVA glue.

Jabil BU let me know the above settings but wasn't sure what MBI recommends

Carbon Fiber JABIL JABIL PA 4035CF LABS METHOD X
View Comment

JABIL SEBS 95A (Flexible) Settings

by aaskedall

Printers Supported: Method, Method X

Material Selected in MakerBot Print: PETG

Support Material: PVA

Print Mode: Balanced

Custom Settings:
Extruder 1 temp: 250-260 (260 preferred for better layer adhesion)
Extruder 1 temp raft base: 270C for better adhesion.
Print speed raft base: 20mm/s

Other Workflow Steps:
Build plate: may require PP tape for larger prints

View Comment