Loading

KIMYA ABS ESD Black

by Johan-Broer

Please note that only the black MIKYA ABS ESD is qualified for MakerBot LABS using the settings below. The white version of KIMYA ABS ESD is not qualified.

Printers Supported: Method X

MakerBot Print/CloudPrint Settings:
Model Material: ABS
Support Material: SR-30
Print Mode: Balanced

Custom Settings
Extruder 1 temp: 260C
Chamber Temperature: 90C
Roof Solid speed 20 mm/s
Roof surface speed: 10mm/s
Shell fan: 50%

Other Workflow Steps:
Clean nozzle with Makerbot ABS after using

View Comment

KIMYA ABS EC

by Johan-Broer

Printers Supported: Method X

MakerBot Print/CloudPrint Settings:

Model Material: ABS

Support Material: SR-30

Print Mode: Balanced

Custom Settings
Extruder 1 temp: 270
Extruder 1 temp raft base: 275
Chamber temp: 85
Top fill speed 40 mm/s

Other Workflow Steps:
Please make sure to clean the nozzle in between prints. You may see burn marks on your print if material accumulates on the nozzle.

View Comment

KIMYA ABS Kevlar

by Johan-Broer

Printers Supported: Method X

MakerBot Print/CloudPrint Settings:

Model Material: ABS

Support Material: SR-30

Print Mode: Balanced

Custom Settings
Extruder 1 temp: 250C

Other Workflow Steps:
Please make sure to clean the nozzle in between prints. You may see burn marks on your print if material accumulates on the nozzle.

View Comment

KIMYA ABS CARBON Settings

by aaskedall

Printers Supported: Method X

Material Selected in MakerBot Print: ABS

Support Material: SR-30

Print Mode: Balanced

Custom Settings:
None

Other Workflow Steps:
None

View Comment