Loading

LUVOCOM 3F PET 9780 BK

by Johan-Broer

Printers Supported: METHOD X, METHOD
Material Selected in MakerBot Print: Nylon CF
Support Material: PVA
Print Mode: Balanced

Custom Settings:

Temperatures
Extruder 1 Base Layer Surface: 290 °C
Extruder 1 Raft Base: 290 °C
Extruder 1 Raft Interface: 290 °C
Extruder 1 Raft Surface: 290 °C
Extruder 1 : 290 °C

Support Type: Dissolvable – Tapered

Other Workflow Steps:
Please make sure that the material is dried and fed using a Drybox. Use Magigoo PA or Vision Miner Nano Adhesive on the build plate.

View Comment

LUVOCOM 3F PAHT 9825 NT

by Johan-Broer

Printers Supported: Method X, METHOD
Material Selected in MakerBot Print: Nylon
Support Material: PVA
Print Mode: Balanced

Custom Settings:

Temperatures
Extruder 1 RaftBase: 270°C
Extruder 1 Raft Interface: 270 °C
Extruder 1 Raft Surface: 270 °C
Extruder 1 Idle: 200 °C
Extruder 1 : 270 °C
Chamber for PVA: 60 °C
Chamber for SR-30: 80 °C

Speeds
Infill Solid: 50mm/s
Infill Sparse: 50mm/s
Shell Insets: 40mm/s
Shell Outlines: 50mm/s
Other Workflow Steps:
Please make sure that the material is dried and fed using a Drybox. Use Magigoo PA or Vision Miner Nano Adhesive on the build plate.

View Comment

LUVOCOM 3F PAHT CF 9891 BK

by Johan-Broer

Printers Supported: METHOD X, METHOD
Material Selected in MakerBot Print: Nylon CF
Support Material: PVA
Print Mode: Balanced

Custom Settings:

Temperatures
Extruder 1 Base Layer Surface: 285 °C
Extruder 1 Raft Base: 285 °C
Extruder 1 Raft Interface: 285 °C
Extruder 1 Raft Surface: 285 °C
Extruder 1 : 285 °C

Support Type: Dissolvable – Tapered

Other Workflow Steps:
Please make sure that the material is dried and fed using a Drybox. Use Magigoo PA or Vision Miner Nano Adhesive on the build plate.

View Comment