Loading

Recent Topics

LABS Extruder with Method and TPU

by dwestfall

Does anyone know if you can use TPU filament with the LABS extruder for Method? If so, do you have any settings that can be used as TPU is not listed in the slicer?

Thanks
Dirk

View Comment

Printing with no filament in bays

by RichTrix

Hiya guys

I am having a bit of an issue. brought two MakerBot labs extruders for our method. Only takes one! Seriously MakerBot your onto a good thing! let us use two!

The problem I am having is I have my custom filament loaded through the AUX port I am only printing one material I do not want any support of any kind!
The method will not let me print as its saying its out of filament in the bays!!! I am hoping its something really silly I am missing

View Comment

Polymaker PolyMax™ PC Settings

by aaskedall

Printers Supported: Method X

Material Selected in MakerBot Print: PC-ABS

Support Material: SR-30

Print Mode: Balanced

Custom Settings:
Extruder 1 temp: 250C
Extruder 1 temp raft base: 250C
Extruder 1 Print Speed Floor Surface: 40 mm/s
Extruder 1 Speed Outlines: 50 mm/s
Chamber temp: 85C
Soluble support: change from tapered to column

Other Workflow Steps:
Caddy (material absorbs moisture)

View Comment

Need help creating printmode for 1.0 nozzle

by Dagrinder

I'm somewhat new to 3d printing and have a replicator 5th gen. Annd would like to do some prints with a 1.0 nozzle and not sure what settings to change. If someone could help me or has a printmode for 1.0 could you please share.

View Comment

Makerbot tough PLA with Experimental Extruder

by emcamposBR

Does anyone have printed Tough PLA with Experimental Extruder? Can you guys share the profile for the MakerBot Print?

View Comment