General

Similar to this design:

https://news.goodyear.eu/the-goodyear-aero--a-concept-tire-for-autonomous-flying-cars/

How is it compared with 3D printed or other drone propellers?

in my prints, there is a little bit of space between the different lines.
i have cr10s, and flow set to 120, but it doesnt help….
do i set the flow higher?

Hi everyone,

i finished my Microcopter Frame the "Skitto".
Its made for PLA and lightweight (the 100mm version is about 7g)

Its made to be built with Loom Silicone Rubberbands in mind. Cam, VTX, RX and FC are all mountable with rubberbands. That makes In-Field-Repairs a breeze.

I even added a 130mm Version, and PropGuard and PropDucts.

I would love to hear your feedback.

PS: I will add better pictures and a how-to install during the next week

I am completely new to Drones and have purchased all the components I require to build it but I am running into an issue binding my FlySky FS-T6 to the receiver, I have tried binding it externally with a ESC and it works fine that way but from what I can tell the board is getting power but the receiver pins are not, unsure why this is as I can not see any visual issues but I have noticed the PDB is getting quite hot but not smoking or making any signs of it short circuiting however I am still very new to this so it may be that I am just missing something obvious. Any help would be great!

I am using a Turnigy MultiStar 30A BLHeli_32 4-In-1 Race Spec ESC W/ F4 FC, OSD & BEC (2-4S) control board, if anymore information is required feel free to ask, as I said I am quite new to drones and so may not be providing the correct information.

I created a full mod to enable Flysky FS-i6 and FS-i6X to use almost any frsky module on the market from TBS crossfire to R9M and even the Multiprotocol Modules.

Check it out have a detailed video on the build process also.

https://www.thingiverse.com/thing:3171697

https://www.thingiverse.com/thing:3063581

I need a 12*6 size propeller ...

I modeled up the DALRC ESC and Flight control boards for anyone needing to use as reference in their quad designs. If you have any requests for other boards let me know.

https://www.thingiverse.com/thing:2968197

If anyone needs help with building quadcopters, want to see unboxing of some of the latest gear, etc - this will be the channel to watch. Headed up by one of the most knowledgeable, but as of yet unheard from electronics engineers in the hobby. We have convinced Darkbeard to come out of his electronics closet and start sharing his knowledge with the masses. I can't stress enough how much this guy knows. I have listened to him perform live help on complete builds, repairs, diagnosis, and general FPV knowledge for hours on end and it is absolutely amazing what this guy knows. Streaming LIVE right now! https://www.youtube.com/watch?v=kOZgE9zx1K8