Loading

Models of printed parts.

by joeyiglesias83

Hello. I'm trying to find models of the printed parts to the Raiscube R2. Any chance anyone knows where to find these?

View Comment

Firmware upgrade

by feiticeir0

Hi all !
Thank you for the group !
Is there any way to upgrade the firmware on the printer ? Where can it be found ? Or what settings need to be changed for it to work ?

Thank you

View Comment

New Raiscube R2 Timelapse...

by ChrisKaye

Just finishing a 4 hour print for a couple of 3.5" to 2.5" drive adapters to fit an SSD into an HP z820 workstation from thing:
https://www.thingiverse.com/thing:1635980

Timelapse to follow!

Spoiler: I totally forgot to take into account the bridging but have been blown away by printer performance!! :)

2.5 SSD to 3.5 HDD caddy adaptor
View Comment

New resource for Raiscube owners!

by ChrisKaye

Hi all,

I've had my Raiscube R2 printer for a little while and the only thing that I found disappointing was that there didn't appear to be a strong community for it as with the Tronxy or Anet machines. So I decided to do something about it and have set up a crude blog site to help act as a resource and a meeting point where people can ask questions, swap ideas and talk about upgrades/mods to get even better results from the machine.
Most importantly, I have posted the source files to allow owners to be able to upgrade to more recent firmwares and still have a working machine at the end of it!

Please check it out, over at: http://raiscubeownersgroup.wordpress.com

Thank you & happy printing!
Chris

View Comment