RepRap is humanity's first general-purpose self-replicating manufacturing machine. It is an open-source project that focuses on the creation and development of 3D printers that can print (some of) their own parts.
More information can be found at the wiki: http://reprap.org/wiki/Main_Page
This group is a place to discuss and share files related to, but not limited to; printer designs, modifications/upgrades, calibration, etc.
Join to share your own RepRap related designs with this group!
I am plugging the pi in to the type B USB port and i keep getting the following error:
Error: Failed to autodetect serial port, please set it manually.
The pi is fine, it worked onthe previous melzi board, but now it wont connect to the MKS board. Is there some setting I am missing here? Any help appreciated.
Just wanted to throw a thread here that made it apparent using the Simplifi3d - LulzbotTaz 3 settings for older model Lulzbot printers works well. The only things I had to do was set the platform dimension to the smaller size of the AO 101 and add a script to make sure the fan is running. I had been messing with these settings for awhile and finally broke down and bought Simplify3d. Man am glad I did because even though this is an old ass machine it works like a dream.
Has anyone ever worked with this expansion board?
If so, can you share a picture of how you connected it to Ramps?
For the past month or so my printer has been running fine. But a problem I had about 2 or 3 months ago started happening again. My Z axis on my ramps 1.4 AM8 started making a shaking/grinding noise and one side of the axis skips around a bit and lags behind the other stepper motor I have a video of it on youtube here
It will randomly get back to normal movement but then the Z axis is uneven.
I'm not sure if it means my stepper motor is dying or maybe the stepper driver but i'm not too sure what it means. any help would be great.