Tevo Tornado

Does anyone knows if the BIGTREETECH TFT35-E3 V3.0 fits the brainbox of the Tornado?
Layout of the E3-version (Ender 3) looks the same, but is it?

Does anybody know of a good wiring diagram that includes the psu? Or where there is a really clean picture of the wiring? MKS Gen L V1.0

Hi, all.

A while ago a cracked the corner of my glass bed.

But everything was still printing fine.

Until the other day when nearly NOTHING would stick to the bed despite plenty of glue stick and the bed being levelled.

So, i decided to remove the whole thing and I found a new large crack as seen on the photos.

I heated the bed up and easily removed the heater part.

Can anyone point me to a cheap replacement Tevo Tornado glass bed on aliexpress or banggood, please?

So far i can see:

https://www.aliexpress.com/item/4001269632196.html?spm=a2g0o.cart.0.0.5b623c00ymbLKB&mp=1

https://www.aliexpress.com/item/32871480714.html?spm=a2g0o.cart.0.0.5b623c00ymbLKB&mp=1

One from the guys i bought the printer from ( https://homers3dprinter.com ) would be US$63.00 including postage.

Snapped a corner off some time ago, but printing was still fine.

I think i have a crack in it now and for some reason, the past couple of days NOTHING would print.

Despite plenty of glue-stick, nothing would stick.

And yes, the bed is level.

Looking online and at a glass supply place here in New Zealand, i am totally shocked i have to spend around NZ$70 to get a replacement bed!

I bought one of those green stickers for the bed ( pre-snap i think ) and it was the best investment i made with i would say 98% of prints sticking well.

Any ideas for replacement bed?

I hear that getting the heating element off the glass is next to impossible.

Dean

Hi all.

Where can i buy a replacement extruder/filament feeder spring?