This time i made a making video of a Antibacterial Facemask to protect yourself from CORONA Virus.The model was created by Ezteban.I am hereby clearing everyone that wearing the mask will not protect you from the virus clearly ,but then they are a preventive source of help for everyone as prevention is better than cure.This mask has not been medically certified however we are sharing this video as a means to find preventive measures to fight the CORONA Virus.
Here is the link to download the model of the Antibacterial Facemask:
For more info you can check the link in description:
To learn about the antibacterial properties of Copper3D, check out the link:
Follow me on my instagram at
Here is my thingiverse account:
Above is the link to the video which shows how 3D Printed Cards [VISITING CARDS or GREETING CARDS] can be made.You only need to use leftover filament and the design time required is very less.
I am attaching a CRISTIANO RONALDO CR7 3D PRINTABLE CARD for all of you.Do subscribe to my Youtube Channel for more 3D Printing and 3D Modelling Tutorials.
I have been playing around with Cura for A while and have been making some excellent prints lately.
As you already know, Cura comes with 3 basic print settings. I found that the high quality print alway's failed to print the last top layer.
This is because the infill is set to a low value"20". I found a way to chage it to 25 and now i'm finnaly making perfect prints.
Theese are the settings i use:
go to Basic:
Layer height (mm) 0.06
Shell thickness (mm) 0.8
Enable retraction: yes
bottom/top thickness (mm) 0.6
Fill density(%) 25
Speed and Temperature
Print speed (mm/s) 50 (yes it takes a long time but it's worth it)
Depends on model ...
What settings do you use ?
I'm working on some gcode that I can insert before a specific layer in order to pause and change filament.
I don't like using Cura. I like using Simplify3D. I prefer it for many reasons that I won't go into now.
Has any experimented with inserting their own pause code? If so, please post your code.
This is what I have come up with so far.. it seems to work half-way decently.
G91; Set Coordinates to relative to last position
G1 E-6 F3600; retract
G1 Z30.0000 F9000; Move nozzle up 30mm to change filament
G1 X-50.000 F6000 ; Move to X 50
G90; Set Coordinates back to absolute to origin of machine
M104 S0; standby temp
I ordered my Ultimaker2+ Upgrade kit a month ago now. As soon as it arrives, I'm gonna post a little review of the kit here.
So far for my status: I ordered at IGo3D.com, which sadly now is the only provider in Germany for Ultimaker Parts, no more ordering via the Ultimaker Shop. In the beginning it was 1-2 weeks, after many lame excuses it went up to 2-4 weeks, now they state the kit as out of stock and I'm still waiting :( with no info at all about the status of my order. Let's see how this progresses.
So far the kit looks like a good improvement and also will come with axis rods and complete print head, inclusive cooling https://ultimaker.com/en/products/extrusion-upgrade-kit.