Loading

Recent Topics

Do you own an Ultimaker Clone? Which vendor? Any likes/dislikes?

by jadames

Do you own an Ultimaker Clone? Which vendor? Any likes/dislikes?

View Comment

Marlin Firmware

by sint_vaffel

Hello, anyone who have managed to create a working marlin firmware for z360 printers?
i keep geting "out of printing area" message every time i try to print.
If i skip through bed leveling prosses, it works. if i level it it won't.

View Comment

Useful Scripts

by jadames

Do you have scripts that you use with your Ultimaker Clone? Please share them here.

View Comment

Firmaware Jennyprinter z360TS

by Sergio974

Bonjour,

J'ai acheté une Jennyprinter Z360 TS (avec écran tactile) sur Aliexpress, quelqu'un aurait-il le firmware pour la carte et pour l'écran? Non livrés avec la machine et impossible d'obtenir quoi que ce soit avec les chinois.Merci d'avance à ceux qui pourraient m'aider.

Cordialement.

View Comment

New feeder on my Jennyprinter Z360

by jim2print

Hello,
i have a Z360 printer (1.75mm version with dual feeder but i just use one) for about 10 month.
I printed a lot of pieces really different without big problems; i have a really awesome quality comparing with my old geetech G2s...
Now i wanted to update the feeder which make sometimes weak infill.
So i bought a geared feeder on ali (see photo)
I put it on my jennyprinter, inverted 2 wires of the motor to change rotation and i sended gcode to modify Esteps,
[Before modification:M92 X160.00 Y160.00 Z200.00 E514]
[After modification (gear ratio is 3:1)M92 X160.00 Y160.00 Z200.00 E1542, M500]
And my problem is during retractions; when my filament do retraction it goes really very sloooowly (about 5s for my 4.6mm retract)
In simplify 3D i adjusted my retract speed to 40mm/s (as before modifying my feeder)

Thoses slow retraction cause problems because plastic is flowing during this....

For info, i didn't chage any setings in Simplify3d after my feeder replacment.
When i try to extrude manualy with the maintenance menu all is good; plastic goes out when turning knob.

I can't understand my problem.... If you have an idea ??
Do i need to set the Edriver current or other thing ?

View Comment