Useful Scripts

Please Login to Comment

Do you have scripts that you use with your Ultimaker Clone? Please share them here.

Don't forget the offset for toolhead. 18.30mm

Dual Extruder Tool Change Script
Credit goes to Mauricio Bachega
NOTE: For Dual Extruder Printers Only. Also remember to remove this script when printing using a single extruder. Otherwise, the printhead will heat up to the max temperature (195) and will ignore the temperature that you specified in extruder temp.

; Tool change script start
G1 X40 Y40 F4000 ; Move out of the way while the printer cools down inactive tool and heats up active tool
{IF NEWTOOL=0}; RIGHT Extruder is active (T0)
{IF NEWTOOL=0}M104 S145 T1; Cool inactive printhead to 145c (T1)
{IF NEWTOOL=0}M109 S195 T0; Heat active printhead to 195c (T0).
{IF NEWTOOL=1}; LEFT Extruder is active (T1)
{IF NEWTOOL=1}M104 S145 T0; Cool inactive printhead to 145c (T0)
{IF NEWTOOL=1}M109 S195 T1; Heat active printhead to 195c (T1).
; Tool change script end