Made by 802printer, uploaded
Successfully printed and sanded the head and body of the rhino, however a business emergency required me to travel, and I ran out of time to print the legs.
Below is the slicing/printing information, as well as a time lapse video of the print.
Print time: 10h:29m:58s (combined)
Filament: 1.75mm PLA (Natural color)
Filament Needed: 20406mm (combined)
Print Speed: 20mm/s
Outer Perimeter Speed: 28mm/s
Infill Speed: 20mm/s
Shell Thickness: 0.8mm
Temperatures: (Hotend) 170C, (Bed) 70C
Printed on: SeeMeCNC Orion Delta