Sliced using Skeinforge with a layer height of 0.2mm and an infill of 10%. Printed on my RepRap Mendel90 dibond machine.
Took a few hours to print and I had to be careful to make sure I was never alone during this time just in case I got scared to death as the model took shape. (Reminded me so much of the Monty Python sketch here https://www.youtube.com/watch?v=ienp4J3pW7U ).
I used Faberdashery Crystal Clear PLA for the bulk of the model which was exchanged for Glowbug Yellow at a height of 25mm.