I haven't made a stand for it, but I'm so pleased with how this came out.
.15mm layer height
10mm/s bottom layer
40mm/s for most of the print (slowed down to 30mm/s in the last quarter)
Printed on an Ultimaker 2. Took about 14 or 15 hours.
Video coming soon to YouTube.
10mm/s bottom layer, with glue
40mm/s for most of the print. Towards the end I slowed it down to 30mm/s and saw a noticeable improvement in the print quality.
I used a scalpel to clean up the bottom after printing.