The Skylift
Made by johnesc, uploadedDescription
I highly recommend using a speed of 20 - 30mm/s when printing the ropes on the basket on bottom and be sure to check your # of perimeter shells. I setup two processes in Simplify3D that allowed me to print the bottom and 50mm/s and then slowed it down to 30mm/s once the ropes began printing.
Print Settings
Printer:
e3D BigBox
Rafts:
No
Supports:
No
Resolution:
.20mm
Infill:
10%
Notes:
FoxSmart Pink & Gold PLA and 3D Universe Purple PLA; 195/70 temps