ZMR 250 spacer arm
Made by conjur, uploaded
Thingiview
Description
Still printing.
- Heavily modified CTC Replicator clone
- Florescent Yellow ABS
- Sliced with Slic3r
- 0.2mm Layer height, no support/brim, 3 perimeters, 3 solid layers, 45% honeycomb infill, 0.5mm extrusion width
- 130c bed (surface temp = 118c)
- 260c head (actual hot end temp = 218c; The Chinese are apparently bad at math)
Looking good so far, will post an update if they turn into florescent bananas!