Great model! It did print nicely, supports for the frame only.
I used ICE PLA filaments Wondrous White & Brave Black - both 190°C.
I used M3 screws to attach bottom cover to frame, worked well.
Installed the electronics components except the LiPo (a bit difficult to source here in Europe).
The tutorial recommends to attach the feather board with 2xM3 screws but it does not work (holes on feather are too tight): M2.5 would work better; I will print the frame bottom part to test with M2.5.
The code provided with the tutorial includes only 3 basic effects; It would be really great to have a more complete code with all the effects as seen on the tutorial videos.