Large "Print-in-place" Ball Bearing (Ø145mm)
Made by Tel0ss, uploaded
Thingiview
Description
this was done at the school shop with a tinkerine printer, (marlin Cartesian)
your printer must be well configured for this to work, the tolerances are very tight, i have not had any luck yet on my own delta printer
even after you get a good print, you will spend a few hours running it around to smooth out and free up the rollers
with a good printer it can be scaled to 50%
Print Settings
Printer:
Tinkerine
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2
Infill:
15