StretchBee_20x20_SlightlyStronger (200um PLA print) with GREENBEELIGHT (150um PLA print).
1) Furious FPV PIKO BLX FC (original version) - running BetaFlight 3.1.7 (8/8/32) - http://www.helidirect.com/piko-blx-micro-flight-controller.html;
2) INNOVA VTX (banggood version) -https://www.banggood.com/Micro-20x20mm-VTX-OSD-V2-5_8G-40CH-25mw-200mw-FPV-Transmitter-Integrate-OSD-1_2A-Fliter-BEC-for-F3-p-1138894.html?rmmds=myorder;
3) FrSky XM+ rx - https://www.banggood.com/Frsky-XM-Micro-D16-SBUS-Full-Range-Receiver-Up-to-16CH-p-1110020.html?rmmds=myorder;
4) DYS XM10A escs (MultiShot v14.85) - https://www.banggood.com/DYS-XM-Seris-XM10A-BLHeli-mini-10A-ESC-For-High-KV-Power-Electronic-Speed-Controller-p-1031926.html?rmmds=search;
5) RCX H1105 V2 4000KV Multirotor Brushless Motor - http://www.myrcmart.com/rcx-h1105-v2-4000kv-multirotor-brushless-motor-for-120150-frame-59g-p-9137.html;
6) Gemfan 3025 PC Propeller CW/CCW For 1104 Motor - http://www.banggood.com/2-Pairs-Gemfan-3025-PC-Propeller-CWCCW-For-1104-Motor-120-150-160-RC-Multirotors-p-1059763.html;
7) Linear FPV antenna - https://www.banggood.com/5X-Micro-5_8G-FPV-VTX-Antenna-IPEX-55mm-for-Eachine-X73-CM275T-VTX01-VTX02-VTX03-Camera-p-1134978.html?rmmds=myorder;
8) 600TVL CMOS FPV camera - https://www.banggood.com/600TVL-8_0MP-14-2_8mm-CMOS-FPV-170-Degree-Wide-Anlge-Lens-Camera-PALNTSC-p-984345.html?rmmds=detail-bottom-viewalsoview;
9) buzzer - https://www.banggood.com/10Pcs-5V-Electromagnetic-Active-Buzzer-Continuous-Beep-Continuously-p-943524.html?rmmds=myorder;
10) RealAcc antivibration rubber FC mounts - https://www.banggood.com/4-PCS-Realacc-M376-Flight-Controller-Fixed-Screws-for-FPV-Racer-p-1135527.html?rmmds=search;
11) Turnigy nano-tech 450mAh 3S 65C Lipo - https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=75756;
12) Anti-slip rubber battery tape - https://www.banggood.com/Silicone-2mm-Thickness-Non-slip-Mat-Battery-Anti-skid-Pad-Battery-Mat-for-RC-Multirotor-p-1078125.html?rmmds=myorder;
13) 25mm M3 Aluminum Alloy Standoff - https://www.banggood.com/10pcs-M3-Black-Round-Aluminum-Alloy-Long-Nut-Studs-Standoffs-Fastener-8-35mm-p-1071462.html - https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=75756;
14) JST connector - https://www.banggood.com/Wholesale-5-Pairs-15cm-JST-Connector-Plug-With-Connect-Cable-For-RC-BEC-ESC-Battery-p-50810.html?rmmds=search (NOT SILICONE WIRES).
Weight without the battery - 94.8 grams.
0.2mm and 0.15mm
Bottom plate - no supports, top pod - with supports. Be careful printing pod - it may warp a bit on the sides.
NICE BUILD! Thanks for posting! Looking forward to hearing how it flies. Be careful - it's super fast, especially in yellow :)
Had a similar problem printing the pod. I used some "helper discs" to keep it down a bit and just clipped and filed them off post print (i'm also using a MkII).
Thanks man! I think the stretched concept provides more stability.
I edited my make and included the youtube video if you want to check it out!
It flies super awesome!!!
hot damn - that looked super smooth.
Yeah, the stretchness does seem to add some character. Once I got my rates worked out I think I like it more. I just really like the platform though. It's so quite. On the DYS3045 props, which are borderline for the 1104 6500kv's, you can barely hear it, perfect for storming around in neighborhoods.
sweet flying! - i approved of everything except ... i saw you blow right through that stop sign. not cool. not cool. think of the children!! :)
I was able to really get the PIDs locked in; however, the VTX seems to be very weak, not within the spec. Even on 200mw it feels like 25mw when it heats up!
Check the pics LOL :) Is it the material you used? - https://www.amazon.com/gp/product/B00VHKKUUW/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1