-- Note -- Print on it's side, as Sumpy suggested.
Slick, quick, & works perfect with 3/32" glass. I spent $8 to have a local glass shop trim up a piece of glass to 6.25" x 5.125", and have them diagonally cut the corners back. (5/8" from the corner on the X & Y edges, making the diagonal ~7/8" long.) This just barely left the home spot over the glass, so I nudge it forward a bit. I use small binder clips and no thermal pads. PLA works great on clean glass with the bed set for 60C. Life is sooo much nicer with perfect bed planarity!