Makes life a bit easier. But I had to drill out the hole to 3mm because the drag on the filament was to great. Filament is always bowing so its dragging on the walls of the hole.
Tevo Little Monster
215°C, 100 mm/s
I know what you mean; coincidentally, the remix solves that issue by utilizing some PTFE tubing. I still had to drill the hole out slightly for the tubing to fit right and glued it in place.
Ah ok, good to know. Though it's fine for me now.
Btw: I will test it with the horizontal spool roller (https://www.thingiverse.com/thing:2790294) after I took on that mammoth print (~7 hours for all parts). ;-)
yeah the hole is slightly out of alignment, i fixed it in the remix. Just finishing the new version off in the next few days for dual extrusion and dual filament detectors without the need for nuts :)