First print. Printable_Wrench_W_Longer_Screw. 100% scale. 50% infill. PLA. LulzBot Mini. Standard quality. Quality of print very good although with a bit of flattening of the knurls on the bottom. Waste pieces broke out well. Sliding jaw loosened without too much effort. Barrel screw was seized forcing me to drill a hole clear through so that I could insert a nail for some mechanical advantage. Next print will be in ABS. I'll also try printing the Printable_Wrench_W_More_Gap and maybe try messing with the scale (although the Mini is limited to 6" x 6" x 6" prints).