Having problems uploading pictures....
A slightly modified version of the Stargrove1s' Thermal Camera. I had to make a new battery holder for a poundland usb powerbank which actually makes the wemos battery shield redundant. I still use the battery shield as it has extra rails for gnd and 3.3v glued to the side so four extra i2c shields can be used at the same time if you want
The thermal sensor has been moved to a more central region and the wemos has been stacked on top of the sensor. The width had to be extended by 5mm to compensate for the stacked wemos and battery shield but you can just cut the battery shield legs a bit shorter. It's up to you.
To get the correct orientation for the thermal sensor and the screen, the model will have to be modified ever so slightly( pic 7).
I print most things at 5% infill to save filament to start with. This is one such test piece that actually turned out alright so will leave it at 5% infill.
This is unfinished as the bolts holding the battery holder to the main body need to be moved further apart!