RC Tank
Made by zuendy, uploaded
Description
I love both rc tanks, but this redesign is so great!
All parts were printed with the following print settings
Material: PLA / ABS
Nozzle diameter: 0.4mm and 0.5mm
Layer height: 0.2-0,3mm
Printing speed: 60 mm / s for ABS 110mm / s for PLA parts
Contour: 3
Closed cover layers: 3
Closed soil layers: 3
Infill: 45%
Support: no
Printing Time 74h
Used filaments:
ABS Orange: https://ebay.to/2JM9Wt8 (I had 2.85mm diameter)
ABS Black: https://ebay.to/2GZeuhQ (I had 2.85mm diameter)
ABS Blue: https://ebay.to/2H1d4iY (I had 2.85mm diameter)
PLA beautiful bright blue: https://ebay.to/2JMb3Jk (I used 1.75mm diameter)
PLA White: https://ebay.to/2IVX8PD (I used 1.75mm diameter)
Print Settings
Printer:
Reprap Mendel + ANET A8
Rafts:
No
Supports:
No
Resolution:
0,2-0,3
Infill:
45
Hello, I'm currently working in this project and I'm stuck in the part where I do not know which transmitter, remote control and batteries I'm supposed to get. Will highly appreciate if you tell me where to get what i mentioned above.
--Thank you
You need an Remote Control with mixed channels, Transmitter is mostly included. Batteries 3 oder 4s Lipo 3000-5000 mAh, Motors works 2216-11 750-900kV, Motorcontroller are 3 or 4s Controllers.