These are actually some of the very first things I've made on the printer, despite having built it years ago. I had a lot of trouble with it at first and just left it collecting dust for several years. A couple weeks ago, I dusted it off, put it back together, went over all the settings, leveled the bed, installed a new, better extruder, updated the software, installed a set of FSRs under the bed to level it with, and it's working quite well. The FSRs are currently double-stick-taped to the plywood base, and the heated bed and the glass over it are held in place loosely by 5 or 6 screws with rubber washers on them. <.< Next order of business was to print and install some decent mounts and hold-downs. My power supply (from an old file server) wasn't quite able to keep up with the demands of four steppers, a heated bed, and a hot-end, and it started smoking! I didn't even know they could do that - don't they have over-current protection or something? Anyway, installed a MeanWell 29amp @ 12V supply tonight, and we're back in business. Thank you lots for the FSR mounts; hopefully they're the first of many printed parts!