I printed it with Robox printer using normal PLA and thermal PLA. Settings were set to fine and 20% fill with raft. But current size was too fragile so I first made a set 150% the size and later 125%. Building it without a raft causes the front legs to break off but still looks good (old Egyptian sculpture?) the breaking off still happens at 125% size. Using the thermal PLA means that when you lay your head over it or put your hand over it it will turn pink. Printing it at 100% size (drawn size) also makes the ring a bit flimsy. Gunmetal ear wires purchased https://www.spoiltrottenbeads.co.uk/ . needes small nose pliers to open it up just enough and hook it on.