Wonderful model! Scaled to 175% and it printed purr-fectly :)
Used my 3D pen to add the pupils on the eye indentations.
Going to try and add some filament whiskers, using extruded black filament straight from the 0.4mm nozzle - will drill some 0.5mm holes (or use a heated pin) and glue them in - will post an update when the whiskers are done (if it turns out well!)
UPDATE - 24 Oct -- additional pics added :)
Added the whiskers - extruded some black filament from a 0.4mm nozzle, drilled three 1mm holes on each side and glued then in - bent to shape carefully!
black, white, red
Added a 15-ring skirt to ensure bed adhesion.
0.4mm nozzle at 210 deg C, bed @ 52 deg C
Print speed @ 50mm/s, slowed for the top-most pointy bits!