Fortnite Llama model from the excellent Llama model uploaded by Keezekel. The model is pretty much spot on and has a ton of geometry there to play with if someone wanted to do so. Beware though - all that geometry leads to long processing and slicing times.
Printed in PLA, primed then painted with acrylic and enamel paints.
This model needs supports because nearly all of the ribbons have 90 degree overhangs. I tried several times to print this at 200% and failed (well 2 completed but with pretty horrible skin and a nearly non-existent tail lol) because I tried to do it with minimal supports. I ended up even using support interfaces (but beware they are a nightmare to remove).
I recommend you have a slow speed for the walls. At 200% this one took about 11 hours total print time with speeds going between 25mm/s and 55mm/s. Slower really is better here.
Support everywhere - not just from build plate. I used support interfaces as well with 80% roof and floor.