Awesome cube design! Went with a 330x330x 465 build area. Running a lerdge k board and bmg extruder. Had custom smoked acrylic panels made for all the panels. Thanks Ben for the great printer design!!
could you please share your Lerdge K configuration? I'd also like to go with this one
Can you share the stl to fit lerdge display of your project?
330x330? You have change the Buildarea Size?
I used a different heat bed that has a volume of 330x330. I also made the height 465 so the full build volume is 330x330x465
Oh ok ... I don't see that the Bed is bigger when the height 465
I'm not sure I understand you. I am using a larger/different heatbed than suggested
No idea if we understand each other :)
I would be interested in what you have changed so that the bed is 330x330 mm? Because normally it is maximum 310x310mm. But the profile lengths have to be changed?
No my bed is 330x330 and I print from edge to edge. I have 3 printers that use this . I just made all the extrusions 500mm instead of 496
Now I understand :) what you make ... Thanks for the input.
you must modified front pannel to mount lerdge display or fit whitout mod?
Yes it is a modified front panel. Someone posted a modified panel but I did not like how there was holes in the front that were not needed so I modified his version.
Tanks for the info:)
Looks Great ! :) Where did you get the 3D file for the power supply and the mounts for the side glass ?
Own personal design I can upload them when I get a chance
Can you Share the correct and complete Set of Extrusions that you use, for this build area?
how much was the cost of all project? can you pls share all with us for the reference.
I sourced all of my parts from the US and bought name brand parts so I spent way more than it can be built for. Ben said he was able to build his for about $500 but I spent more than double that
can you pls share a video while printing.
Yes when I get home I will post a video of it printing
AWESOME!!! GREAT JOB!
NIce, how did you mount the heated bed to the aluminum frame?
There are mounts that are printed. I used a 3mm 330x330 aluminum plate with springs mounted to the Z carriage. I then have solid bed mounts between the 330x330 heat bed and 3mm plate below it
Beautiful looking printer. A job well done
Damn, that looks good!!
I couldn't make it any better... excellent work!!!
Thanks Ben I love it and I appreciate the help when I needed it!
Great Job!But why use a Y-cable for two Z axis motors
Most boards run 2 Z motors on 1 stepper driver. There is a separate driver slot I could use but this board would require another Z end stop for that driver also. But to answer your question most if not all boards run 1 driver for 2 Z steppers
You can use one Z-end stop to control 2 Z-driver with Lerdge K.The second Z-end stop is optional.
Thanks for the tip I had no idea but since it is up and running this way im going to leave it
nice to see one finished:)
im also building, and pretty mutch just need eletronics and side panels
Thanks Cruice! looking forward to see your make of it!