Very nice result. Work very well also as they fit the K-Cups perfectly.
They take a while to print, but work well if printed standing up with supports. In fact supports barely hung on, so easy removal and of course on the bottom, so interfaces not visible anyway.
The double sided foam tape I got was not thick enough to fill in the tape slot on the back, so had to double up on it. Even then, only left a little gap between the cabinet and the dispensers that I have to look closely to see. Also, the tape I got sticks REALLY well to the cabinet, so only had to use two strips approx. 20mm long. They are not coming off without some work.
Thanks for the design!