First print of the cube for my VEX team.
Support was set to only in contact with build plate - all other angles are 45°friendly. Using the roof support function left excellent finish. All but one of the base supports neatly pried out. Broke that corner when prying out the support. I believe the error was my having the build plate slightly off level in that corner.
At 5% infill , cube minus supports massed 272g compared to VEX spec of 285g. Excellent match. Perhaps a slightly higher percent infill.
Cost was 313g of filament and 25h of print time. Compared to store-bought at $8/cube, this is not a bargain. BUT we wanted one now for design purposes.
Screenshots of the advanced Cura setting attached.
Thanks to the author for such an excellent model.