Turned out great. Sliced with PrusaSlicer (NOT Slic3rPE) with a recommended rotation on the bed. Turned out great and everything has a snug fit. I printed the open end as i will be using a USB cam. I like the little touch of having the inside tabs slide into a bracket and secured with 2 screws on the open end. Keeps it nice and secure for taps.Only possible issue i see is the usb at the bottom. I plan to get some right angle adapters to see if it will clear the flat of a table with out the screens overhanging slightly. Once i have those on hand i will test.
Inland (MicroCenter) PETG
Load the model. Do not move it. Rotate it. Note the rotation is not a full 45°. Just rotate until the Blue model turns Green. (Thanks FlyByTom)