Halo Energy Sword
Made by necro133, uploadedPrint Settings
Printer:
Leonardo3D
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
20
Notes:
I was using supports and rafts only for handle, blade is without supports or raft. Inside I have digital LED strip which will be powered from other driver or from motherboard in my PC. Amazing model, amazing job.
Thank you Adafruit :)
G'day mate, I was just wondering what the average "lifespan" of one full charge would be?
(assuming you have used/installed the 3.7v 2000mAh battery)
Hi mate, unfortunately I can't answer for your question. My led's are connected to external power source. I have about 2 m of lights with 12V and WS2811 driver.
And because I have an external power and signal it will take less power than with driver in handle like original one.
https://cdn-shop.adafruit.com/datasheets/WS2811.pdf
https://ledlightsworld.com/blogs/led-lighting-knowledge-base/how-to-select-appropriate-transformer-for-12v-led-strips (look at step one ;) )
Hopefully that was useful.
Also I just make a copy, you can ask designer (Adafruit) they have a nice channel on YouTube.
I wish you successful calculations ;)
Have a good day mate.