"V8E print in place" STL
Printed perfectly fine on my first attempt and it spins as expected. I used PLA and the gears aren't smooth, I'll be sure to print with ABS now that I know PLA printed successfully.
Sliced with Prusa Slicer 2.0
0.4 mm nozzle, 0.15 quality settings preset with following changes:
- Supports: Support on build plate only
- Print settings > Support material > "Contact Z distance" to 0
- Print settings > Speed > "Perimeter", "Small perimeter" and "External perimeter" set to 20 mm/s