My first real print with a resin printer (Anycubic Photon).
I used the original green transparent resin. The slicer had trouble building automatic support material for the islands, so I took the model with built-in support.
The print is about 9.5cm tall and I printed with 0.05mm layer height and with raft (it seems like you always want raft with that printer, at lease all my test prints of Benchy failed without raft).
However, The built-in support material is a bit too near to the model and much of the scaffolding was stuck to the model (not only the top as expected).
After sanding I sprayed it with clear coat. Looks amazing!