Printed in Wood PLA 0.2mm.
Cover took 5 hours
Inner doors 2.5 hours
Outer doors 2.5 hours
Screw base 5 hours.
Sanded down to 240 grit and given coat of matte lacquer.
Internal diameter was 45mm so laser cut 4cm thick EVA foam to 48mm (heat shrank it by 3mm to make it fit) and used as a ring box in my recent wedding.
Asides needing a soldering iron to gently melt one of the inner doors back to position as it kept locking open, it was a perfect box for our big day - thanks so much Prot0typ1cal!